This site uses cookies and related technologies for site operation, analytics, and third party advertising purposes as described in our Privacy and Data Processing Policy. You may choose to consent to our use of these technologies or reject non-essential technologies. To opt-out of sharing with third parties information related to these technologies, select "Decline All".
Programmable 2-Relay Timer
- Flexible Triggering: Accepts PNP, NPN, or Micro Switch Inputs
- Cyclic, Sequential, Combinational, and Forward/Reverse Options
- Time Range: Adjustable from Hours/Minutes/Seconds
- Easily Reset via Front Keypad or Remote Control
Load Cell Controller
- Accept Multichannel mV Input from Load Cell to Measuring the Load
- 5-Digit Dual LED Display for Accurate Indication of Load
- 2-Relay for Switching Alarm, Load with Built-in Load Cell Excitation Supply
- Optional Analog Retransmission and RS-485 MODBUS Communication
1-Relay Digital Timer
- 3+3 Digit Dual Display timer
- PNP/NPN/Micro Switch Trigger Input
- Instant On-Off Delay/Cyclic Mode
- Range Hour/Minute/Second
- Reset by Front Keypad & Remote
- With Power Fail Memory
1Ø Watt Meter
- 1Ø-2Wire
- CT Primary 5A to 50A
- Voltage 0-300V AC
- Size: (H)96mm X (W)96mm X(D)43mm
- Accuracy: 0.5
Water Level Controller
- High & Low-Level Indication LED for Lower & Upper Tank
- Delay Time (0-10) Sec.
- Sensitivity Adjustable: 1K Ohm to 1M Ohm
- Pump protection from Dry run & Overflow condition
Multifunction Timer
- On delay
- Interval
- Cyclic equal Off First
- Cyclic equal On first
- Pulse output, 500ms fixed
- Delay On break
- Delay on make / Delay on break
- Interval after break
- Single shot
- Retriggerable single shot
- Latching relay
Din Rail Mount
- 3 Line – 3 Digit Display for Easy to Use and Understand 3 Phase Value
- 3 Phase 3 Wire / 4 Wire Selectable
- Display 3 Phase Voltage (Ph-Ph, Ph-N), 3 Phase Ampere & Frequency
- Programmable Tripping Parameter
Cyclic Timer
- Precise Timing: Control Activations/Deactivations from 0.1 Seconds to 10 Hours
- Heavy-Duty Output: Handle Devices with a Single 5A SPDT (2-C/O) Relay at 230V AC
- Adaptable Power: Works with Diverse Sources- 12-240V DC or 20-240V AC
Voltage Protection Relay- Digital Din Rail Mount
- 3 + 3 Digit, 7-Segment Red + Green or Red + White LED for Bright Visibility
- 2-Relay Option Available
- Programmable Tripping Parameter On
- Over & Under Voltage, Phase Asymmetry, Phase Loss, Phase Sequence, Neutral Loss
- Individual Enable /Disable Tripping Parameter
Process controller
- Universal Input: Works with Various Sensor Types (4-20mA DC, 0-20mA DC, 0-10V DC)
- 4-Digit Display: Clear and Precise Readings
- Built-in Sensor Power: Eliminates external power supply for sensors
- Dual Relay Outputs: Controls Two Separate Devices
Flow Totalizer
- Pulse or Analog Input for Measure the Flow
- Individual Display for Totalizer & Flow Rate
- Upto 2-Relay Output with Retransmission & RS-485 Modbus Output Facility
Din Rail Mount – Overload Relay 3Phase-CT Built-in
- Range 50-100A AC
- Trip and Power On Delay 0-9 Sec
- 1 Relay 1C/O, 5A,230V AC
- Front Test and Rest Key
Din Rail Mount – Earth Fault Relay
- Input thru External CBCT
- Front and Terminal Test and Reset Function
- Programmable trip Delay
- 2 Relay NO-C-NC, NO-C ,5A,250V AC / 30V DC
Winding Temperature Relay (Thermistor Relay)
- Safety device for Electrical Motor in Industry
- Trip based on overheating sense in Motor Winding
- PTC Temperature Input
- 1 Relay 1 C/O,5A, 230V AC
DC Energy Meter
- Shunt Selectable: -1 to 9999 Amp
- DC Voltage Range: -999 to 1000V DC
- DC Watt Range: -999 to 9999 KW DC
- RS-485 Modbus Optional
CRYO -10A Single Output
- Single NTC input for temperature sensing.
- 10A relay output for controlling compressor or heater loads.
- 3-digit white/red display with 0.1 resolution for accurate temperature monitoring.
- Time-based defrost facility for efficient operation in refrigeration systems.
Automatic Power Factor Controller- APFC
- Single CT, 2Ø Voltage input
- 8-Stage APFC
- Auto/Manual/Rotation Mode
Jumbo Display Process indicator
- 4-Digit, 4-Inch Red LED Display(Single/Dual Side)
- Universal Input (4-20mA DC/0-20mA DC/0-10V DC)
- Upto 3-Digit Resolution
- Optional Relay and Retransmission Output Possible
3Ø Voltmeter
- 3Ø-3W/4W
- Individual Display for 3Ø Voltage
- Primary Voltage: 100V to 520KV AC
- Secondary Voltage : 100V to 520V AC
Multifunction Meter - 3 Line Display
- 1Ø-2W, 3Ø-3W/4W Selectable
- PT Ratio & CT Ratio Selectable
- Pulse & RS-485 Modbus Communication
- Accuracy Class 0.5
CRYO - With Alarm Function
- Single NTC input for temperature sensing.
- 10A relay output for controlling compressor or heater load.
- 10A alarm output or 12V DC buzzer for high/low temperature alerts.
- 3-digit white/red display with 0.1 resolution for clear temperature indication.
3Ø Energy Meter
- Network Selection: 3Ø-4Wire
- Measure and Display KW, KVA, KWH Meter
- Pulse Output and RS-485 Modbus Communication
- Relay Available in Model EPM-14
Digital Time Totalizer-Hour Meter
- 6-Digit Timer
- Micro Switch/Limit Switch/Proximity Switch/230V AC Input (Factory Set)
- Reset by Front Keypad and Remote
- Range Hour/Minute/Second
- With Power Fail Memory
1Ø AC Ampere Meter – Built in 30A CT
- 7-Segment, 4-Digit LED Display
- Builtin 30A Direct CT
- Supply Voltage: 100-270V AC, 50/60 Hz
Demand Controller
- 1Ø-2W, 3Ø-3W/4W Selectable
- PT Ratio & CT Ratio Selectable
- THD upto 32th Order for Ampere + Voltage
- Pulse & RS-485 Modbus Communication
- Accuracy Class 0.5
4-Digit Dual Display Three Output PID Controller
- Universal Input (J/K/RTD)
- 4-Digit Dual Red/White LED Display
- PID/On-Off Controller
- Three Output (Relay or SSR) for Load Control & Alarm Functions
- With Soak Timer Facility
Multi output Photo Electric Controller
- Versatile Sensing: Handles Multiple Proximity Sensor Inputs For Accurate Monitoring
- Extensive Control: Offers Up To 8 Relay Outputs For Flexible Device Operation
- Mechanical Integration: Includes A Clutch Brake Output For Direct Mechanical Engagement
- Intuitive Interface: Features A User-friendly Touch Display For Effortless Control
Multifunction Meter - THD & IMP-EXP
- 1Ø-2W, 3Ø-3W/4W Selectable
- Separate Display for KWH Reading
- PT Ratio & CT Ratio Selectable
- THD Upto 32th Order for Voltage & Current
- Maximum Demand on KW & KVA
- Pulse & RS-485 MODBUS Communication
PID temperature Controller
- Universal Input
- J / J.1/ K / K.1/ E / B / R / S / T / N ( Configurable )
- PT-100 / PT.1 2 or 3 wire ( Configurable )
- 4-digit Dual Red/White LED Display
- Accurate PID Controller
- Dual Relay for Output and Relay 1 Parallel to SSR for Load Control
- Size: 72 (H) x 72 (W) x 85 (D) mm
- Supply voltage: 100 to 270V AC/DC, 50-60Hz
Digital Display with Din Rail On/Off Delay/Cyclic Timer
- 3-Digit Display
- Set by Keypad
- On-Off/ Cyclic Mode
- Range: Hour/Minute/Sec
- With Power Fail Memory
PID Controller with Ampere Indication-2 OUTPUT
- Thermocouple Input: J or K-Type
- PID Control: Precise Temperature Regulation
- Ampere Indication: Monitors Current for Various Loads
- Current Transformer Compatibility: Single or Three Phase, upto 60A
- Dual Relay Outputs: Versatility for Load Control
water level controllers
- High & Low-Level LED Indication
- Sensitivity Adjustable: 1K Ohm to 200K Ohm
- Pump protection from Dry run & Overflow condition
Length Counter
- Versatile Input: Accepts Proximity Sensors Or Encoders for Flexible Measurement
- Dual Relay Control: Operates Upto 2 Devices Independently
- Comprehensive Display: Tracks Total Length (6-Digits) And MPM (4-Digits)
- Convenient Reset: Options For Automatic Or Manual Clearing
Din Rail Phase Sequence Relay
- 3 Phase 3 Wire Input
- Separate Aux supply not needed as it is self-powered
- Tripping parameter : Phase Sequence, Phase Loss & Phase Asymmetry
- 1 Relay 1 C/O
PID Controller with Ampere Indication-3 OUTPUT
- Thermocouple Input: J or K-Type
- PID Control: Precise Temperature Regulation
- Ampere Indication: Monitors Current for Various Loads
- Current Transformer Compatibility: Single or Three Phase, upto 60A
Din Rail Earth leakage Relay
- Bright 3+3 LED Display in Din Rail Mount
- Range: 30mA to 30A AC
- Programmable Trip Delay
- 1-Relay, 1-C/O
- With Front Key and Terminal Reset and Test Function
Power Supply 24V-6.5A
- Power 156W
- Efficiency > 90% @230V AC
- Material: Front Facia (ABS) & Enclosure (Aluminium)
- Peak efficiency: Save energy with High-Performance Conversion and Adjustable Voltage.
Power Quality Meter
- 1Ø-2W, 3Ø-3W/4W Selectable
- Voltage Input 100V to 520kVAC, Secondary 100V to 520V AC
- THD Upto 32th Order
- Import Export Energy
- Import Export Energy Measurement
- Pulse & RS-485 Modbus Communication
PID Controller Modules-2 Output
- Universal Input (J/K/RTD)
- 7-Slave Modules Connect with 1-Master Module
- Dual Output (Relay or SSR) for Load Control & Alarm Functions
- RS-485 Modbus for HMI/PLC Communication.
Digital Panel Mount – Current Protection Relay
- 4+4 Digit
- Programmable Over and Under current
- 2-Relay Option Available
- Fail Safe and Non Fail Safe Mode
Power Supply 48V-5A
- Power 240W
- Efficiency > 93% @230V AC
- Enclosure: Polycarbonate
- Peak efficiency: Save energy with High-Performance Conversion and Adjustable Voltage.
Earth Leakage Relay- BUILT IN CBCT ID 35 mm
- Range 30mA to 3A AC
- No Need of Separate CBCT as Built in CBCT (ID 35mm)
- Digital Display for Programming Leakage Setting and Trip Delay
- 1-Relay, 1-C/O,5A,230V AC
- With Front Key and Terminal Reset and Test Function
Multifunction Meter - THD Function
- 1Ø-2W, 3Ø-3W/4W Selectable
- PT Ratio & CT Ratio Selectable
- THD upto 32th Order for Ampere + Voltage
- Pulse & RS-485 Modbus Communication
- Accuracy Class 0.5
On/Off Delay timer
- Precise Timing: Delays Activation/Deactivation Upto 60, 30, or 10 Sec/Min/Hrs
- Simple Setup: Fixed Time Ranges Eliminate Complex Programming
- Wide Compatibility: Operates On Standard 230V AC Power
Forward Reverse Timer
- Forward & Reverse time : 0.1 Sec to 10 Hour
- Pause time 1 to 100 Sec
- 2-Relay 1-C/O, 5A, 230V AC
- Universal Aux Supply 12 to 240V DC, 20V TO 240V AC
Ampere + Volt Combined Meter
- Separate Display for Ampere + Voltage
- CT Selectable upto 2000A
- 30A AC Direct CT Available
(Panel Mount) Multifunction 3 Phase Protection Relay
- 3 Line – 3 Digit Display for Easy to Use and Understand 3 Phase Value
- 3 Phase 3 Wire / 4 Wire Selectable
- Display 3 Phase Voltage (Ph-Ph, Ph-N), 3 Phase Ampere & Frequency
- Programmable Tripping Parameter
Counter + RPM
- Versatile Input: Accepts Proximity Sensors for Accurate Counting
- Single Relay Control: Activates a Device Based on Count Totals
- Informative Displays: Tracks Total Count and RPM Separately
- Flexible Reset: Offers Both Automatic and Manual Reset Options
4 Channel Scanner
- Universal Input (J/K/RTD/4-20mA DC/0-10V DC/0-20mA DC)
- 4-Relay Output for Alarm and Tripping with Grouping Facility
- USB Data Logging & RS-485 Modbus Facility
RPM Controller
- Flexible Input: Works with Proximity Sensors or Micro Switches
- Dual RPM Displays: Tracks Both Set and Present RPM for Easy Comparison
- Dual Relay Control: Operates Upto 2-Devices Based on RPM Readings
- Retransmission Output Available on Request
Multifunction Meter - Horizontal Mounting
- 3Ø-4W Design for Comprehensive Power Measurement
- Pulse and RS-485 Modbus Communication for Versatile Integration
- High Accuracy Class 0.5 for Reliable Data
Programmable counter
- Adaptable Input: Works with Proximity Sensors or Micro Switches for Versatility
- Relay Control: Operates Devices Independently (Upto 2 Relay Available)
- Clear Count Tracking: Displays Present Count and Set Count Separately for Easy Monitoring
- Convenient Reset: Offers Both Automatic and Manual Reset Options for Flexibility
Star Delta Timer
- Delay Range: 0-60 seconds
- Pause Options: 50ms or 100ms
- Versatile Power: Selectable 415VAC or 230VAC auxiliary supply
DIN Rail Digital Multifunction Meter
- 1Ø-2W, 3Ø-3W/4W Selectable
- Primary Voltage 100V to 520kVAC
- Secondary Voltage 100V to 520V AC ( L-L )
- Pulse & RS-485 MODBUS Communication
- Accuracy Class 0.5 ( Standard )
Fix Input Single Display Temperature Controller
- Fixed Input (J/K/RTD) for Versatility
- Clear 3-Digit LED Display for Easy Reading
- Precise PID or On-Off Control For Accurate Regulation
- Flexible Output (Relay || SSR) for Load Compatibility
Din Rail Mount– Current Protection Relay
- Programmable Over & Under Current
- 1-Relay, 1-C/O,5A,230V AC
- Digital Display 3+3 Digit in Din Rail Mount
(Panel Mount) Earth to Neutral Relay
- Digital Display for Earth- Neutral Voltage Indication
- Display Range 0-10V AC
- Programmable Relay for Set Value
- 1 Relay 1C/O, 5A ,230V AC
4 Digit Dual Display Dual Output Accurate PID Controller
- Universal Input (J/K/RTD)
- 4-Digit Dual Red/White LED Display
- Accurate PID Controller
- Dual Output (Relay || SSR) + (Relay or SSR) for Load Control & Alarm Functions
- With Soak Timer Facility
16 Channel Scanner
- Versatile Input: Works with Various Sensor Types (J, K, RTD, 4-20mA DC, 0-10V DC, 0-20mA DC)
- Extensive Control: 8-Relay Outputs for Alarms, Tripping, and Grouping
- Data Management: USB Logging and RS-485 Modbus Communication
Fix Input Dual Display Temperature Controller
- Fix Input: Accommodates (J/K or RTD) Sensors
- Clear Display: 3-Digit Dual Red/White Led for Easy Readability
- Control Options: Choose Between Precise PID or Straightforward On-Off Control
- Flexible Output: Single Output for Load Control, Compatible with (Relay || SSR)
Universal Input PID Controller with Analog Output & RS-485 Modbus Facility
- Universal Input (J/K/RTD/4-20mA DC/0-10V DC/0-20mA DC)
- 4-Digit Dual Red/White LED Display
- 2-Relay Output
- Analog Output (Retransmission & Controlling) & RS-485 Modbus Facility
Thumbwheel Counter
- Adaptable Input: Works with Proximity Sensors or Micro Switches
- Clear 4-Digit Display: Shows Process Count, Set via Thumbwheel
- Versatile Relay: Controls a Device Based on Count
- Counting Flexibility: Choose Up or Down Counting for Various Applications
3Ø Power Meter
- Network System: 3Ø-4W
- Bright 3+3-Digit, 7-Segment White LED Display
- Separate displays for Ampere and Voltage indication
1Ø AC Ampere Meter
- 7-Segment, 4-Digit LED Display
- CT Selectable upto 4000/5
- Supply Voltage: 230V AC
Process Indicator
- 4-Digit Process Indictor
- Universal Input (4-20mA DC/0-20mA DC/0-10V DC)
- Upto 3-Digit Resolution
Analog Voltage Protection Relay - Din Rail Mount
- Under-Over Voltage Set by Analog Knob
- 1-Relay, 2-C/O
- Knob Settable for Under Voltage, Over Voltage & Trip Delay( Model VR-3K, VR-3KN)
Digital Din Rail Mount – Current Protection Relay
- Programmable Over & Under Current
- 1-Relay, 1-C/O
- Fail Safe & Non Fail Safe Mode
- Available in 1Ø and 3Ø
Power Supply 12V-5A-P
- 60W rated power
- Efficiency > 86% @230V AC
- Enclosure: Polycarbonate
- Peak efficiency: Save energy with High-Performance Conversion and Adjustable Voltage.
1Ø Energy Meter
- Single-Phase, 2-Wire Setup for Efficient Energy Monitoring
- Accurate KWH Measurement & Display for Real-Time Insights
- RS-485 Modbus Communication for Seamless Integration with Systems
Slim Signal Isolator
- Fix Analog Input & Output With Inbuilt Sensor Supply
- Slim Size Which Occupies Less Space in Panel
- Available in Single And Dual Output with Higher Noise Rejection Ratio
- 3-Way Isolation Input-Output, Input-Supply, Output-Supply
Phase Sequence Relay
- Protection Available :
- Phase Sequence
- Phase Loss
- Phase Asymmetry
- Auxiliary Supply:
- 154V to 500V AC, 50/60Hz, 3Φ3W
- 1 Relay 1C/O, 5A, 230V AC (Resistive load)
Power Supply 24V-5A
- Power 120W
- Efficiency > 89% @230V AC
- Material: Front (ABS) & Enclosure (Aluminium)
- Peak efficiency: Save energy with high-performance conversion and adjustable voltage.
Power Supply 48V-2.5A
- Power 120W
- Efficiency > 89% @230V AC
- Mounting DIN Rail
- Material: Front Facia (ABS) & Enclosure (Aluminium)
- Peak efficiency: Save energy with High-Performance Conversion and Adjustable Voltage.
4-Digit Dual Display Single Output Accurate PID Controller
- Universal Input
- J / J.1/ K / K.1/ E / B / R / S / T / N ( Configurable )
- PT-100 / PT.1- 2 or 3 wire ( Configurable )
- 4-digit Dual Red/White LED Display
- Accurate PID Controller
- Relay 1 Parallel to SSR for Load Control
- Size: 101 (H) x 101 (W) x 54 (D) mm
- Supply voltage: 100 to 270V AC/DC, 50-60Hz
3Ø Ampere Meter
- 3Ø Ampere Meter
- Individual Display for Each Phase Current Ampere
- CT Selectable Upto 9999A
- RS-485 Modbus Option Available in Model AMP-13
DG Monitoring Relay
- Network Selection:3Ø-4W
- Protection Available
- Over / Under Voltage
- Asymmetry
- Phase loss
- Phase Sequence
- Reset Mode: Auto
Cooling Controller
- 2NTC Thermistor & Pulse
- 10A Relay Output Controls Compressor Load
- Dedicated 10A Relay for Fan & Defrost Functions
- Keypad Module for User Interaction
Star Delta Timers
- Delay Range: 0-60 seconds
- Pause Options: 50ms or 100ms
- Versatile Power: 415V AC or 230V AC or 110V AC
Voltage Transducer
- Designed for AC Voltage Input
- Provides Fixed Analog Output
- Available in Single or Dual Output Configurations
- Excellent Noise Rejection
- Comprehensive 3-Way Isolation for Safety:
- Input to Output
- Input to Supply
- Output to Supply
1Ø AC Voltmeter
- 7-Segment, 3-Digit LED Display
- Range 30-500V AC
- Supply Voltage: 230V AC
Three Phase Power Analyzer
- Network System: 3Ø-4W
- Bright 4+4+4 Digit, 7-Segment RED LED Display
- Separate displays for Ampere and Voltage indication
RPM Indicator
- Adaptable Input: Works with Proximity Sensors or Micro Switches for Versatility
- Clear RPM Display: 4-Digit Readout for Accurate Monitoring of Rotational Speed
- Wide Measurement Range: Captures Readings Cover Various Applications
Current Scanner
- 8 CT Input with Inbuilt 60A AC Current
- Compact Size with 3-Digit Led Display
- RS-485 Modbus Output
4/8/12 Channel Sequential Timer
- Display: 4+4 Digit Dual Display (Sequential)
- Input: Micro Switch/NPN Proxy
- Modes: Delayed On/Off, Cyclic
- Reset: Front Keypad, Remote
Programmable 2 Relay
- Flexible Sensing: Connect Multiple Proximity Sensors For Comprehensive Input.
- Control Capabilities: Operate Upto 2 Devices With Independent Relay Outputs
- Mechanical Engagement: Integrate Directly With Mechanical Systems Using The Clutch Brake Output.
- Informative Display: Visualize System Status And Settings on a Clear Graphic LCD
Batch Counter
- Flexible Input: Works with Proximity Sensors or Micro Switches
- 1 Relay 1C/O + Buzzer Output
- Detailed Tracking: Displays 6-Digit Total Count and 4-Digit Batch Count
Voltage Protection Relay Din Rail Mount - Analog
- Selection of Under-Over Voltage by Knob
- Trip Delay Selection by Dip Switch
- 1-Relay, 2-C/O, 5A, 230V AC
1Ø Frequency Meter
- 1Ø Voltage Input
- Range: 45.0 TO 65.0 Hz
- Size: (H)96mm X (W)96mm X (D)43mm
Humidity + Temperature Controller
- RTD + Humidity Sensor Input
- 4-Digit Dual LED Display
- 1-Relay Output for Temperature Function
- 2-Relay Output for Humidification/Dehumidification Function
- RS-485 Modbus
8 Channel Scanner with RS-485 Communication
- Universal Input ((J, J.1, K, K.1, PT-100, PT.1,R,S,E,N,T,B,C,L,U 0 - 10V DC,
0 - 20mA DC, 4 - 20mA DC, 1 - 5V DC) - 4 Relay (NO-C-NC) 1C/O 5A@230V AC, 5A for resistive load
with RS-485 RTU MODBUS - 4-Relay Output for Alarm and Tripping with Grouping Facility
Time Control Switch
- 50 On-Off Program
- 24 Holiday Setting
- 1 sec Resolution
- Auto/Manual Mode
Universal Timer Relay
- Bright 3+3 Display in Din Rail Mount
- Operating Mode :- Cyclic (On / Off timer ), Delay (On / Off timer )
- 1-Relay, 1-C/O
- With Front Key and Terminal Reset
CRYO – Air Dryer Application
- Single NTC input for temperature sensing.
- 10A relay output dedicated to compressor load.
- 10A relay designed for defrost heater or drain valve control.
- Equipped with a user-friendly touch/keypad module.
DC Ampere Meter- Direct 20A DC
- Input through DC Shunt 75mV DC
- Range: 2A DC, 5A DC, 10A DC, 20A DC (Factory Set)
- Supply Voltage:100-270V AC/DC, 50/60 Hz
Signal Isolator-Temperature Input
- Accepts RTD Sensor Inputs
- Choice of Single or Dual Outputs
- Exceptional Noise Resistance
- Robust 3-Way Isolation for Protection:
- Input to Output
- Input to Supply
- Output to Supply
DC Multifunction Meter
- DC Amp Through-75mV to 75mV DC
- DC Volt Range: 0-1000V DC
- Display Volt, Ampere, Watt, KW, KWH
- RS-485 Modbus Communication
8 Channel Scanner
- Universal Input (J/K/RTD/4-20mA DC/0-10V DC/0-20mA DC)
- 4-Relay Output for Alarm and Tripping with Grouping Facility
- USB Data Logging & RS-485 Modbus Facility
Current Transducer
- Handles Current Transformer (CT) Inputs
- Provides Fixed Analog Outputs
- Offers Single or Dual Output Options
- Boasts Exceptional Noise Resistance
- Ensures Safety with 3-Way Isolation:
- Input to Output
- Input to Supply
- Output to Supply
Power Supply 24V-10A
- Power 240W
- Efficiency > 93% @230V AC
- Enclosure: Polycarbonate
- Peak efficiency: Save energy with High-Performance Conversion and Adjustable Voltage.
Power Supply 15V-5A
- Power 75W
- Efficiency > 86% @230V AC
- Material: Front Facia (ABS) & Enclosure (Aluminium).
- Peak efficiency: Save energy with High-Performance Conversion and Adjustable Voltage.
Voltage Protection Relay - 4 Knob
- Selection of Under-Over Voltage by Knob
- Individual Knob For Trip Delay Time & Rated Voltage
- 1-Relay, 1-C/O, 5A, 230V AC
- Self-Powered
Power Supply 12V-8A
- Power 96W
- Efficiency > 85% @230V AC
- Mounting DIN Rail
- Material: Front Facia (ABS) & Enclosure (Aluminium)
- Peak efficiency: Save energy with High-Performance Conversion and Adjustable Voltage.
Vibrator Controller
- Safety-Focused Interlock: Ensures Secure Operations with Proximity Sensor Input
- Precision Control: Fine-Tunes Vibrator Coil Output with Variable Percentage Adjustments
- Powerful Load Handling: Drives Devices or Peripherals upto 5A
load sharing relay
- For balancing operation between 2 Loads – Like Generators, Motors, Pump
- Increasing Load Work life
- 2 Potential Free Micro Switch Input
- 2 Relay ,5A, 230V AC
Panel Mount Earth Leakage Relay
- 4+4 Digital Display for Indication of Leakage and Set Current
- 1-Relay, 1-C/O
- Fail Safe and Non Fail Safe Mode
- RS-485 Modbus Available in Model ELR-19
Thumbwheel –On/Off Timer
- 3-Digit Display, Time Set by Thumbwheel
- Input Proxy/Micro Switch
- Delayed On/Off
- Range Hour/Minute/Second
- With Power Fail Memory
Power Supply 12V-1A
- Power 12W
- Efficiency > 89% @230V AC
- Material: Plastic Enclosure.
- Peak efficiency: Save energy with High-Performance Conversion and Adjustable Voltage.
DC Ampere Meter
- Input Through DC Shunt 75mV DC.
- Range 0-9999DC Selectable.
- High Precision: Achieve accurate DC current measurements to ensure optimal system performance.
Energy Power Meter
- Network Selection: 1Ø-2W, 3Ø-3W, 3Ø-4W
- Measure and Display KW, KVA, KWH Meter
- Pulse Output and RS-485 Modbus Communication
AVF Meter - 3 + 3 Line Display
- 3Ø-3W/4W, 1Ø-2W Selectable
- 3-Line Display for Voltage & Current
- 6-Line Display – 3-Line + 3-Line, 7-Segment LED Display
- RS-485 Modbus Available
Power Supply 24V-2.5A
- Power 60W
- Efficiency > 89% @230V AC
- Material: 24VDC (Polycarbonate)
- Peak efficiency: Save energy with high-performance conversion and adjustable voltage.
3-Digit Dual Display Single Output PID Controller
- Versatile: J/K/RTD Input for Diverse Sensors
- Clear View: Dual Red/White Led Display (3-Digits)
- Smart Control: PID, (TP) Time Proportional & On-off Modes for Precise Regulation
- Efficient Output: Single (Relay || SSR) for Direct Load Control
Voltage Monitoring Relay- Panel Mount
- Digital display for 3Ø Voltage Indication
- 2-Relay Option Available
- Programmable Tripping Parameter On
- Over & Under Voltage, Phase Assymetry, Phase Loss, Phase Sequence, Neutral Loss
- Individual Enable /Disable Tripping Parameter
Power Supply 24V-1A
- Power 24W
- Efficiency > 85% @230V AC
- Material: Polycarbonate (PC)
- Peak efficiency: Save energy with high-performance conversion and adjustable voltage.
On- Off Delay timer- Universal Supply and Time Range
- Precise Timing: From 0.1 Seconds to 10 Hours, Delay Activations/Deactivations as Needed
- On/Off Flexibility: Choose Between On-Delay or Off Delay Modes
- Heavy-Duty Output: Control Devices with a Single 5A SPDT (2-C/O) Relay at 230V AC
- Universal Power: Adapts to Various Supplies- 12-240V DC or 20-240V AC
DC Volt Meter
- Fixed Range: -20.0V DC to +20.00V DC, -50.0V DC to +50.0V DC, -100V DC to 100.0V DC, -200V DC to +200.0V DC, -750V DC to +750V DC
- Wide Auxillary Supply
CRYO – Panel AC Application
- NTC Input for Temperature Sensing
- Pulse/Door Input for Versatile Functionality
- Powerful 20A Relay Output Controls Compressor Load
- Dedicated 5A Relay for High/Low Alarm Functions
- Convenient Touch/Keypad Module for User Interaction
AVF Meter - 3 Line Display
- 3Ø -3W/4W, 1Ø-2W Selectable
- 3-Digit, 3-Line, 7-Seg, 0.59” RED LED
- Primary CT Selectable upto 9999A
- Secondary CT 5A
- 50-520V AC (L-L), 30-300V AC (L-N)
Color mark sensor
- Rainbow Vision: Distinguish Objects Based on Various Colors
- Lightning-Fast: React precisely in Split Seconds
- Sleek & Compact: Fits seamlessly into limited spaces
- Flexible Output: Adjusts between NPN and PNP signals
Signal Isolator
- Dedicated Analog Input and Output
- Choice of Single or Dual Outputs
- Exceptional Noise Resistance
- Comprehensive 3-way Isolation:
- Input-to-Output
- Input-to-Supply
- Output-to-Supply
Jumbo Display Programmable counters
- Clear Display: Large 4/6-Digit, 4-Inch Red LED, Viewable From One or Both Sides
- Versatile Input: Accepts Proximity Sensors or Micro Switches for flexible Control
- Relay Output: Directly Controls Equipment or Devices for Automation
Analog Din Rail Earth Leakage Relay
- Range 30mA to 30A AC
- Programmable Set and Trip Delay by Knob
- 1-Relay, 1-C/O,5A,230V AC
- With Front key and Terminal Reset and Test Function
Count Totalizer
- Adaptable Input: Works with 230V AC Pulse Signals or Proximity Sensors
- Comprehensive Counting: Tracks Upto 999,999 Counts with a 6-Digit Display
- Convenient Reset: Can be Reset from Both the Front and Back of the Device
Universal Input Single Display PID Controller
- Accepts (J/K/RTD) Inputs for Versatile Sensing
- 4-Digit LED Display for Clear Readouts
- PID, (TP) Time Proportional & On-Off Control for Precise Regulation
- Single Output for Load Control via (Relay || SSR)
DC Amp+ Volt Combined Meter
- DC Ampere Through External Shunt + DC Voltage Direct
- Direct 20A DC with Builtin Shunt Available
- RS-485 MODBUS optional in DC-14
CRYO -20A Single Output
- Single NTC input for temperature sensing.
- 20A Relay Output designed for compressor or heater loads.
- 3-digit white/red display with 0.1 resolution for precise temperature monitoring.
- Time-based defrost feature enhances functionality and efficiency.
Humidity Controller
- Humidity Sensor Input
- 2-Relay Output for Humidification/Dehumidification Function
- RS-485 Modbus
- Analog Retransmission Output
1Ø Multifunction Meter
- Network Selection:1Ø-2W
- Display Voltage, Current, Frequency, Power Factor, Kilo-Watt, Kilo-Watt Hours
- RS-485 Modbus as Per Request
Power Supply 24V-1.5A
- Power 36W
- Efficiency > 85% @230V AC
- Available in Lightweight Plastic Enclosures.
- Peak efficiency: Save energy with High-Performance Conversion and Adjustable Voltage.
CRYO – Dual Compressor Output
- Single NTC input monitors temperature.
- 2X10A relay outputs control compressor with individual set points and time delays.
- 3-digit white/red display shows temperature with 0.1 resolution.
- Prevents compressor overload through cyclic operation, ensuring efficient and safe
Jumbo Display Temperature indicator
- Clear Display: 4-Inch, 4-Digit Red LED (Single or Dual Side)
- Versatile Input: Works with J, K, or RTD Sensors
- Flexible Output: Optional Relay and Retransmission Modules
Multifunction Meter-LCD Display
- 1Ø-2W, 3Ø-3W/4W Selectable
- PT Ratio & CT Ratio Selectable
- THD Upto 32th Order, Import- Export , Maximum Demand
- Pulse & RS-485 Modbus Communication
- Accuracy Class 0.5